Motorcycles & Photography

Cheap & Easy swash plate leveling tool

A must know for any RC heli addict out there. Check this movie on how to level your swash plate using no more than a simple zip tie: [youtube https://www.youtube.com/watch?v=iUAluAxRi4Q&fs=1&source=uds&w=320&h=266]

HobbyKing YAK 54 Build Log

This was my first order from the German warehouse and wow delivery really is quick. Got my package within 3 days! So unreal for a HobbyKing order :D. Was very well packed...

E-Flite P-40 Warhawk Flight Report

After some windy days I went flying in the evening at still 10kmh. No good idea for getting to know this plane but I couldn’t wait no longer. Flew it straight into...

HobbyKing YAK 54 Brushless EPO Plug-n-Fly

I just ordered one of these cheap YAK 54 aerobatic foam platforms. I’m not looking for 3D cause then I would better buy myself a profile foamie. I rather have some scale...

E-Flite P-40 Warhawk 300 ARF

This is a small (650mm WS/200g) affordable P40 warbird that comes completely assembled with motor, spinner, prop and control link hardware. You only need to add the electronics (servo’s, esc, receiver and...

Using Turnigy Imax 9X for Flight Sim

Topic: How-to: Using your transmitter for simulator use Posted: 16 May 2009 at 11:14pm While this was written for the Tunigy 9X most steps should apply to other transmitters. Note that the cable...

Turnigy Imax 9X tx HK 450 setup

Programming the Turnigy 9x for a Trex 450 (or any 450 clone using a CCPM swashplate system)Parts of this tutorial come from: http://rcheli-blog.blogspot.com/p/turnigy-9ch-setup.html, the source I used to get my heli setup properly....

HK 450 V2 build instructions

About the HK450 v2 CCPM 3D Helicopter Kit This cheap 450 clone comes without any manual so you’ll have to look for build instructions yourself. This is what I discovered, hopefully this...

RC Pilot rookie mistakes and how to avoid them

Six Keys to Success for New Pilot Whether you have a coach or you are trying to learn to fly on your own, youwill need to be mindful of these six areas...

Perfect foamie landing gear

I’ve been looking quite long for a good landing gear for my foamies. My landings aren’t as smooth as they should be so they need to be able to handle this. This...